Walther Praezision 高压快速接头

设为首页 | 加入收藏 | 友情链接     

Walther Praezision 高压快速接头
首页  |  公司介绍    |     产品应用    |     合作伙伴    |     客户服务     |     招聘专区     |    English

 

SPIR STAR 高压软管
SPIR STAR High Pressure Hose


  当前位置: 产品展示 - Walther Praezision 高压快速接头     www.walther-praezision.de


 
Walther Praezision 低压系列产品 

Series LP / SP

Series LP / SP

Nominal bore:

2.5, 3, 4, 6, 7, 9, 12, 19, 32 and 50 mm

Working pressure:
up to 10 MPa (single types up to 20 MPa) dependent on nominal bore and material; in part also suitable for vacuum

Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases

Materials:
steel and brass with different surface coatings, stainless steel 1.4404 / 1.4571 or similar

Special features:
Squirt-free, many types of connections, locking aid, ring grips for larger nominal bores

Hydrosys Quick Coupling System
Series KL

Nominal bore:
6, 12 and 30 mm

Working pressure:
up to 1.2 MPa (dependent on nominal bore and material)

Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases

Materials:
polyamide (PA), polyvinylidenfluoride (PVDF), polypropylene (PP), polyacetal resin (POM) or similar
Walther Praezision 高压快速接头

Series UF

Series UF

Nominal bore:

6, 7, 12, 19 and 32 mm

Working pressure:
up to 4 MPa (dependent on nominal bore and material)

Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases, etc.

Walther Praezision 高压快速接头

Materials:

steel and brass with different surface coatings; stainless steel 1.4404 / 1.4571 or similar

Special Features::
Due to the different shape of the guiding parts (triangular, square, round) of coupling and adaptor only coupling halves with equivalent shapes can be connected.

Series BF

Series BF

Nominal bore:

5, 9 and 12 mm

Working pressure:
up to 0.4 MPa (dependent on nominal bore and material)

Media:
water, steam, solvents, acids, bases, oils, all non-lubricating media, etc.

Materials:
stainless steel 1.4404/1.4571 or similar

Special features:
Clean break coupling with easily cleanable smooth ball-face outer contour;
can also be connected under high pressures, squirt-free, high flow rate, automatic lock

Walther Praezision 高压快速接头

Series LS

Series LS

Nominal bore:
   Working pressure:
6, 9 and 11 mm   up to1.2 MPa

Media:       Materials:
compressed air   coupling housing: steel durnicoated
           locking sleeve: brass passivated


Walther Praezision 高压快速接头
Special features :
Compressed air safety coupling with automatic lock and very high flow rates; a special design avoids the dangerous whip effect completely.
The safety coupling is "DEKRA type-tested".
Fits onto different nipple contours.
see also Series LS in large nominal sizes(12, 23 and 38 mm)

Series LS large nominal sizes

Series LS large nominal sizes

Nominal bore:
       Working pressure:
12, 23 and 38 mm      up to1.6 MPa


Media:
compressed air

Materials:
coupling housing: brass nickel plated, locking sleeve: aluminium hardcoated

Special features:
compressed air safety coupling for high flow rates
(free pass when valve is opened)
Unlocking only possible with low residual pressure (this avoids the dangerous whip effect completely).
HydrosyWalther Praezision 高压快速接头
 

Series LT

Series LT

Nominal bore :
      Working pressure:
6, 9 and 11 mm      up to1.2 MPa

Media:
compressed air

Materials:
coupling housing: aluminium hardcoated
locking sleeve: impact resistant plastics

Special features:
Compressed air coupling in very light design for use on the tool side, very high flow rate, fits onto different nipple profiles
Walther Praezision 高压快速接头

版权所有 @ 北京海德利森科技有限公司 京ICP备05076103号
All Rights Reserved by Hydrosys Corporation
中国 北京西二环菜户营58号财富西环大厦 2515室  P.C.:100054
Tel:86-10-6335 7350  Fax: 86-10-6335 6406 
E-mail:sales@hydrosyscorp.com